With the improvement of living standards, many families […]
With the improvement of living standards, many families now choose to install shower rooms in the bathroom. For families with small bathroom space, simple shower rooms are a very good choice. But after the shower room was purchased, we didn't know much about the installation of the shower room. In order to help everyone to use the shower room as soon as possible, we will introduce to you in detail the installation process of the shower room.
[What is the installation process of shower room]
1. Preparation and installation of the basin: regular shower room manufacturers will send professionals to install it, and bring the tools with them, which is quicker and more convenient. The installation of the shower room basin must be done carefully. Testing the water is an indispensable part.
2. Preparation before installation: Check whether the shower room is complete, and check whether the configuration is complete after opening.
3. Install the basin: Combine the components of the basin, adjust the level of the basin, and ensure that there is no water in the basin and the bottom. The hose can expand and contract with distance, connecting the basin floor to the floor drain firmly.
4, test, protection (important link): After the shower room basin is installed, a water test is required to ensure that the water is unobstructed. Before installation of the shower room body, the installed bottom basin should be protected in time.
5. Shower room body installation: Whether the shower room is safe or not has an important relationship with whether the shower room body is properly installed, whether the positioning of the holes is accurate, whether the fittings are tightly installed, and whether the waterproof seals are in place affect the normal use of the product.
6. Locate and punch holes: clarify the arrangement of bathroom water pipes to prevent the hidden pipelines from bursting when punching holes. Use a pencil and a spirit level to determine the drilling position of the aluminum against the wall, and use an impact drill to make holes.
7. Installation of aluminum material (important link): knock in the rubber particles at the drilled hole and lock the aluminum bar to the wall with screws.
8. Fixing glass (important link): The shower room glass is clamped and locked at the drilling hole of the bottom basin. The bottom of flat glass or curved glass falls into the glass clamp slot, and it is slowly pushed into the aluminum attached to the wall. Then fix it with screws.
9. Installation of jacking pipe: find the corresponding position to drill above the fixed glass, install (straight / inclined) fixing seat and connect the jacking pipe. Fix it to the top of the glass with an elbow sleeve.
10, installation equipment rack: measuring position installation equipment rack, screw the plate nut, fix the plate glass, keep vertical and horizontal. Pay attention to waterproofing under the glass fixed aluminum.